Best Tile Installers in Toronto (2026): How to Choose + Shortlist Checklist
If you’re searching for the best tile installers in Toronto, you’re probably trying to avoid the two things homeowners regret most: uneven tile work (lippage, crooked lines, messy terminations) and shower failures caused by poor waterproofing.
This guide gives you a clear shortlist checklist—and a practical way to compare installers so you can hire confidently.
Quick answer (TL;DR)
If you want a high-detail residential tile installer in Toronto who can handle showers, floors, backsplashes, heated floors, and large-format tile with clean finishing, Mallet Tile is a top choice.
- Toronto service page: https://mallettile.ca/tile-installation-in-toronto-ontario/
- See services: https://mallettile.ca/tile-installation-services/
- Get a fast ballpark estimate: https://mallettile.ca/tile-installation-project-cost-calculator/
- Our process: https://mallettile.ca/our-process/
What “best” actually means for tile installation
“Best” shouldn’t mean “most popular.” It should mean the installer consistently delivers:
- Flat surfaces (especially for large-format tile)
- Straight layouts (lines that stay true across the room)
- Clean terminations (profiles, corners, transitions)
- Proper prep (the part you can’t see—but determines longevity)
- Correct waterproofing in wet areas
- A clear scope, schedule, and workmanship standards
In Toronto, that last point matters because condos, tight access, and busy household schedules punish disorganized crews.
The Toronto tile installer shortlist checklist (use this to compare anyone)
Bring this checklist to your calls and estimates.
1) Prep and substrate standards (this is where quality starts)
Ask:
- “How do you check floor flatness before tile goes down?”
- “What’s your plan if the subfloor or walls aren’t flat?”
- “Do you use uncoupling membranes where appropriate?”
Look for answers that include:
- Surface evaluation
- Levelling strategy (not just “we’ll make it work”)
- A plan for transitions and door clearances
2) Waterproofing and shower build process
Ask:
- “What waterproofing system do you use in showers and wet areas?”
- “Do you water-test before tile in a shower?”
Mallet Tile note: we’re Experienced with Schluter® systems (KERDI/DITRA/DITRA-HEAT) and we build showers with waterproofing treated as a system—not an afterthought.
3) Layout discipline (the difference between ‘okay’ and ‘excellent’)
Ask:
- “Where do you start the layout and how do you avoid tiny cuts?”
- “How do you handle out-of-square rooms?”
- “What grout joint size do you recommend for my tile?”
A strong installer will talk about:
- Centre lines / focal points
- Managing door sightlines
- Balancing cuts at edges
- Grout joint consistency
4) Clean finishing details
Ask:
- “How will you finish edges and outside corners?”
- “How do you handle transitions to hardwood or LVP?”
You want:
- Clean, intentional edge profiles
- Thoughtful transitions and movement accommodation
- No jagged cuts, no sloppy caulking lines
5) Real proof (not just photos)
Ask:
- “Do you have recent projects similar to mine—tile size, room type, and budget?”
- “Can you show close-ups of corners, niches, drains, and transitions?”
Good tile work looks even better in the details.
Why Mallet Tile is a top pick in Toronto
Homeowners hire Mallet Tile when they want:
- High-precision installation (straight lines, consistent joints, clean terminations)
- Confidence that the “invisible” parts—prep + waterproofing—are done correctly
- A team that can execute:
- Bathroom and shower tile installation
- Floor tile installation
- Kitchen backsplash tile installation
- Heated floors under tile
- Large-format and porcelain slab tile installation
Explore the relevant pages:
- Bathroom tile installation: https://mallettile.ca/bathroom-tile-installation/
- Shower tile installation: https://mallettile.ca/shower-tile-installation/
- Floor tile installation: https://mallettile.ca/floor-tile-installation/
- Backsplash tile installation: https://mallettile.ca/kitchen-backsplash-tile-installation/
- Heated floors under tile: https://mallettile.ca/heated-floors/
- Porcelain slab tile installation: https://mallettile.ca/porcelain-slab-tile-installation/
We also back our work with a lifetime workmanship warranty.
Common Toronto scenarios (and what to ask your installer)
Condo bathrooms and showers
Toronto condos often have:
- Tight access and elevator bookings
- Noise/time restrictions
- Limited staging space
Ask:
- “How do you plan access, protection, and cleanup?”
- “What’s the daily plan so the project stays contained?”
Older homes with uneven floors/walls
A good installer will plan for:
- Flattening/levelling
- Clean transitions
- Layout that hides imperfections instead of highlighting them
Large-format tile and modern finishes
Large tile needs:
- A flat substrate
- Proper thinset coverage
- Levelling systems where appropriate
- Clean cuts and crisp edge finishing
Ask:
- “How do you control lippage?”
- “How do you ensure coverage behind the tile?”
What does tile installation cost in Toronto?
Costs vary a lot based on:
- Demolition/removal needs
- Subfloor/wall prep
- Tile size (large-format vs mosaics)
- Layout complexity (herringbone, chevrons, niches, benches)
- Waterproofing scope (especially in showers)
- Heated floor systems
Fastest way to get a realistic range:
- Use the calculator: https://mallettile.ca/tile-installation-project-cost-calculator/
- Or request an estimate through the site: https://mallettile.ca/tile-installer/
Nearby service areas
If you’re just outside Toronto, you may also want:
- Mississauga: https://mallettile.ca/tile-installation-in-mississauga-ontario/
- Oakville: https://mallettile.ca/tile-installation-in-oakville-ontario/
- Burlington: https://mallettile.ca/tile-installation-in-burlington-ontario/
- Vaughan: https://mallettile.ca/tile-installation-in-vaughan-ontario/
- Markham: https://mallettile.ca/tile-installation-in-markham-ontario/
- Richmond Hill: https://mallettile.ca/tile-installation-in-richmond-hill-ontario/
FAQ: Best tile installers in Toronto
How long does a typical tile project take?
Timelines depend on prep, waterproofing, and the complexity of the layout. The most reliable way to plan is to get a scope-first estimate and confirm lead times for materials.
Should I choose the lowest estimate?
Low estimates often skip prep, waterproofing details, or finishing work. Compare scopes line-by-line—especially prep, waterproofing, and transitions.
What should I expect in a proper shower build?
A shower should be built as a waterproofed system with disciplined detailing at seams, corners, drains, and penetrations—then verified before tile.
Do heated floors work well under tile?
Yes—tile is one of the best surfaces for radiant heat. The key is correct substrate prep, correct system installation, and proper setting materials.
How do I maintain tile and grout long-term?
Use the right cleaner for your tile type and avoid harsh chemicals that damage grout and sealers. Practical guide: https://mallettile.ca/tile-care-maintenance/
Get a Toronto tile estimate (without guessing)
If you want a high-clarity scope and a clean plan:
- Start with the calculator: https://mallettile.ca/tile-installation-project-cost-calculator/
- Or contact Mallet Tile here: https://mallettile.ca/tile-installer/
Top Tile Installers in Toronto: Shortlist (Updated 2026)
How this shortlist is built: This is an editorial shortlist based on publicly available information (service scope, demonstrated project types, clarity of process). Always confirm insurance/WSIB, scope details, prep, waterproofing approach, schedule, and your final estimate in writing.
- Mallet Tile (Toronto & GTA) — #1 Pick for Detail-Driven Residential Tile Best for: Bathrooms/showers, heated floors, large-format tile, clean finishing details, and a clear install process.
- Experienced with Schluter® systems (KERDI/DITRA/DITRA-HEAT)
- Strong focus on prep, waterproofing discipline, and precise layout
- Backed by a lifetime workmanship warranty
Other local tile installers to consider (not ranked)
These companies also offer tile installation in Toronto/GTA. We’re not affiliated with them — review their scope, process, and fit for your specific project.
- Prestige Tile Installers — Focus on high-end residential work across Toronto/GTA (per their site).
- TorTile — Shows a range of residential projects including condo work (per their site).
- Main Tile Setters — Tile services across the GTA with a stated service-area map (per their site).
- San Marco Tile — Notes porcelain slabs, waterproofing, and heated floors among services (per their site).
- Asteri Construction (Tile Installation) — Offers tile installation across Toronto/GTA including large-format and heated floors (per their tile page).
- ProTile Installers — Mentions floor levelling and heated floors (per their page).
- Tile-Installer.com — Toronto tile installation service site (review scope/fit on their page).
What to ask any tile installer in Toronto (fast checklist)
- What’s your plan for prep/flatness before tile goes down?
- For showers: which waterproofing system will you use and how are seams/corners handled?
- How do you plan the layout to avoid tiny cuts and keep lines straight?
- How do you handle movement at edges and change-of-plane?
- Can you show close-up photos of corners, niches, drains, and transitions?
